ATSG FORD 4R100 Manual page 78

78
Technical Service Information
NUMBER 10A
THRUST BEARING
FORWARD
PLANETARY
Copyright © 2003 ATSG
Figure 127
NUMBER 9B
THRUST BEARING
FORWARD
PLANETARY
Copyright © 2003 ATSG
Figure 128
AUTOMATIC TRANSMISSION SERVICE GROUP
COMPONENT REBUILD
Forward And Direct Clutch Sub-Assemblies
7. Install the number 10A thrust bearing onto the
forward planetary carrier, in the direction that
is shown in Figure 127, and retain the bearing
with Trans-Jel®.
8. Turn the planetary carrier over and install the
number 9B thrust bearing into the planetary
carrier in the direction shown in Figure 128.
Note: Black side faces up.
9. Install the complete forward planetary carrier
assembly into the ring gear, by rotating into
position, as shown in Figure 129.
Continued on Page 79.
59 DIRECT CLUTCH HOUSING ASSEMBLY
72 FORWARD CLUTCH HOUSING ASSEMBLY
91 "6 PINION" FORWARD PLANETARY CARRIER ASSEMBLY
Figure 129
91
72
59
Copyright © 2003 ATSG