ATSG FORD 4R100 Manual page 83

41 INTERMEDIATE CLUTCH PISTON INNER LIP SEAL
42 INTERMEDIATE AND OVERDRIVE CLUTCH CYLINDER
44 INTERMEDIATE CLUTCH PISTON OUTER LIP SEAL
45 INTERMEDIATE CLUTCH PISTON
Figure 137
Intermediate/Overdrive Support Assembly (Cont'd)
10. Install the overdrive clutch piston return spring
in the direction shown in Figure 138.
11. Compress the return spring and install snap ring
and ensure it is fully seated (See Figure 138).
12. Set completed intermediate/overdrive clutch
cylinder aside for the final assembly process.
(See Figure 139).
Technical Service Information
45
44
41
42
Copyright © 2003 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
37 OVERDRIVE CLUTCH PISTON RETURN SPRING SNAP RING
38 OVERDRIVE CLUTCH PISTON RETURN SPRING
39 OVERDRIVE CLUTCH MOLDED PISTON ASSEMBLY
Figure 138
Figure 139
37
38
39
42
Copyright © 2003 ATSG
Copyright © 2003 ATSG
83