ATSG FORD 4R100 Manual page 43

TRANSMISSION DISASSEMBLY
Bottom Pan Components
7. Remove the solenoid body retaining nut and
the 9 retaining bolts, as shown in Figure 51,
and remove the solenoid body assembly.
8. Remove the solenoid body by lifting up with
a small twist to free the connector "O" ring
from the case bore (See Figure 51).
9. Remove and discard the spacer plate to main
valve body gasket, as shown in Figure 52.
10. Remove the solenoid body screen from spacer
plate, as shown in Figure 52, by rotating and
lifting straight up.
Continued on Page 44.
RETAINING BOLTS (14)
RETAINING NUTS (2)
UPPER AND LOWER
MAIN VALVE BODIES
Figure 50
Technical Service Information
DO NOT REMOVE
THESE TWO BOLTS
Copyright © 2003 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
RETAINING
BOLTS (9)
RETAINING NUT
SOLENOID
BODY ASSEMBLY
Figure 51
186 SPACER PLATE TO MAIN VALVE BODY GASKET
187 SOLENOID SCREEN ASSEMBLY
Figure 52
"O" RING
Copyright © 2003 ATSG
186
187
Copyright © 2003 ATSG
43