Manual Shift Lever Differences - ATSG FORD 4R100 Manual

PAN BOLTS (20)
FORD 4R100
MANUAL SHIFT LEVERS
"With" PTO OPTION
STAMPED F81P-AA
FORD PART NUMBER
F81Z-7A256-AA
112
Technical Service Information
BOTTOM
PAN
PAN GASKET
Copyright © 2003 ATSG
Figure 197
"Without" PTO OPTION
STAMPED F75P-BB
FORD PART NUMBER
F7UZ-7A256-BB
Figure 198
AUTOMATIC TRANSMISSION SERVICE GROUP
FINAL ASSEMBLY
Bottom Pan Components (Cont'd)
16. Install a new pan gasket on case surface, as
shown in Figure 197.
17. Install the bottom pan on top of pan gasket, as
shown in Figure 197.
18. Install the twenty (20) pan bolts, as shown in
Figure 197, and torque all bottom pan bolts to,
14-16 N·m (10-12 ft.lb.).
19. Rotate transmission in fixture so bottom pan is
facing down, as shown in Figure 199.
FINAL ASSEMBLY
External Components
1. The manual shift levers are also model sensitive
as shown in Figure 198. Ensure that you have
the proper manual shift lever for the model that
you are building.
2. Install the Digital Transmission Range (DTR)
sensor, as shown in Figure 199, install 307-351
alignment tool (or equivalent).
3. Install the two sensor retaining bolts, as shown
in Figure 199, and torque retaining bolts to,
8-10 N·m (71-88 in.lb.).
Continued on Page 113.
DIGITAL TRANSMISSION
RANGE SENSOR
Figure 199
F o rd
RETAINING
-B A
P- 7 0 0 6
R FF 8 1
9 8
BOLTS (2)
Copyright © 2003 ATSG