ATSG FORD 4R100 Manual page 72

DO NOT USE THIS STYLE DRUM
58 INTERMEDIATE SPRAG OUTER RACE THRUST WASHER (NO. 7)
59 DIRECT CLUTCH HOUSING ASSEMBLY
72
Technical Service Information
"DIODE" STYLE
ONE-WAY CLUTCH
DIRECT DRUM FOR
"DIODE" STYLE
ONE-WAY CLUTCH
Copyright © 2003 ATSG
Figure 113
Copyright © 2003 ATSG
Figure 114
AUTOMATIC TRANSMISSION SERVICE GROUP
COMPONENT REBUILD
Direct Clutch Housing (Cont'd)
5. We have illustrated the "Diode" style one-way
intermediate clutch and the associated direct
clutch drum in Figure 113.
Note: Do Not use this type of one-way clutch
in this unit. It will not live.
6. Place the direct clutch housing on a flat work
surface in the direction shown in Figure 114.
7. Install the number 7 thrust washer, as shown in
Figure 114, and retain with Trans-Jel®.
57
58
58
59
57 INTERMEDIATE SPRAG ASSEMBLY
58 INTERMEDIATE SPRAG OUTER RACE THRUST WASHER (NO. 7)
59 DIRECT CLUTCH HOUSING ASSEMBLY
Copyright © 2003 ATSG
Figure 115
59