ATSG FORD 4R100 Manual page 48

TRANSMISSION DISASSEMBLY
Internal Components (Cont'd)
14. Remove snap ring and intermediate/overdrive
cylinder assembly, as shown in Figure 63, and
set aside for component rebuild section.
15. Remove the intermediate clutch piston return
spring, as shown in Figure 64.
16. Remove the center support assembly, as shown
in Figure 64, and set aside for the component
rebuild section.
40 INTERMEDIATE/OVERDRIVE CYLINDER SNAP RING
42 INTERMEDIATE/OVERDRIVE CYLINDER ASSEMBLY
48
Technical Service Information
Copyright © 2003 ATSG
Figure 63
AUTOMATIC TRANSMISSION SERVICE GROUP
17. Remove the number 6 thrust washer, center
support to direct clutch housing, as shown in
Figure 64.
18. Remove the intermediate clutch pack and the
backing plate, as shown in Figure 65.
19. Remove the intermediate band assembly, as
shown in Figure 66.
40
42
46 INTERMEDIATE CLUTCH PISTON RETURN SPRING
48 CENTER SUPPORT ASSEMBLY
49 NUMBER 6 THRUST WASHER, CENTER SUPPORT
Continued on Page 49.
Copyright © 2003 ATSG
Figure 64
46
48
49