ATSG FORD 4R100 Manual page 52

TRANSMISSION DISASSEMBLY
Internal Components (Cont'd)
29. Remove the low/reverse clutch pack including
wave plate, as shown in Figure 73.
30. Rotate transmission in fixture so output shaft
is facing up, as shown in Figure 74.
31. Remove the extension housing retaining bolts
and housing, as shown in Figure 74.
32. We have illustrated the typical 4WD version in
Figure 74, and the 2WD version in Figure 75.
Continued on Page 53.
99
98 LOW/REVERSE CLUTCH BACKING PLATE
99 LOW/REVERSE CLUTCH FRICTION PLATES (6)
100 LOW/REVERSE CLUTCH STEEL PLATES (6)
52
Technical Service Information
100
101
Copyright © 2003 ATSG
Figure 73
AUTOMATIC TRANSMISSION SERVICE GROUP
98
EXTENSION
HOUSING
EXTENSION
HOUSING GASKET
EXTENSION HOUSING
RETAINING BOLTS
OUTPUT
SHAFT
Copyright © 2003 ATSG
Figure 74