Finding Feature Information - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring Switched Port Analyzer
This document describes how to configure local Switched Port Analyzer (SPAN) and remote SPAN (RSPAN)
on the router.
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Configuring Local Span and RSPAN
Local Span
• Use a network analyzer to monitor interfaces.
Finding Feature Information, page 381
Prerequisites for Configuring Local Span and RSPAN, page 381
Restrictions for Local Span and RSPAN, page 382
Understanding Local SPAN and RSPAN, page 383
Configuring Local SPAN and RSPAN, page 389
Sample Configurations, page 395
Verifying Local SPAN and RSPAN, page 396
Additional References, page 397
Feature Information for Local SPAN and RSPAN, page 398
Bug Search Tool
C H A P T E R
and the release notes for your platform and software release. To
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
17
381