Displaying The Mac Security Status Of A Specific Service Instance - Cisco ASR 920 Series Configuration Manual Ethernet Router

Displaying the MAC Security Status of a Specific Service Instance

Command or Action
Step 6
bridge-domain bridge-id
Example:
Device(config-if-srv)# bridge-domain 200
Step 7 mac security sticky
Example:
Device(config-if-srv)# mac security sticky
Step 8
mac security
Example:
Device(config-if-srv)# mac security
Step 9 end
Example:
Device(config-if-srv)# end
Displaying the MAC Security Status of a Specific Service Instance
Perform this task to display the MAC security status of a service instance.
SUMMARY STEPS
1. enable
2. show ethernet service instance id id
3. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
106
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Purpose
Binds the service instance to a bridge- domain instance
where bridge-id is the identifier for the bridge- domain
instance.
Enables sticky behavior on the service instance.
Enables MAC security on the service instance.
Returns to user EXEC mode.
interface type number mac security
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.