Carrier Ethernet Configuration Guide (Cisco Asr 920 Series - Cisco ASR 920 Series Configuration Manual Ethernet Router

Ethernet Virtual Connections Configuration
show ethernet service instance [id
instance-id interface interface-id |
interface interface-id] {[detail] |
[stats]}
show bridge-domain [n]
show bridge-domain n split-horizon
[group {group_id | all}]
show ethernet service instance
detail
show mac address-table
show mac address-table
bridge-domain bridge-domain id
show mac address-table count
bridge-domain bridge-domain id
show mac address-table learning
bridge-domain bridge-domain id
Description
Displays information about one or more service instance (EFPs). If
you specify an EFP ID and interface, only data pertaining to that
particular EFP is displayed. If you specify only an interface ID, data
is displayed for all EFPs on the interface.
When you enter n, this command displays all the members of the
specified bridge-domain, if a bridge-domain with the specified number
exists.
If you do not enter n, the command displays all the members of all
bridge-domains in the system.
When you do not specify a group group_id, this command displays
all the members of bridge-domain n that belong to split horizon group
0.
If you specify a numerical group_id, this command displays all the
members of the specified group id.
When you enter group all, the command displays all members of
any split horizon group.
This command displays detailed service instance information,
including Layer 2 protocol information. This is an example of the
output:
Router# show ethernet service instance detail
Service Instance ID: 1
Associated Interface: Ethernet0/0
Associated EVC:
L2protocol tunnel pagp
CE-Vlans:
State: Up
EFP Statistics:
Pkts In Bytes In
0 0
This command displays dynamically learned or statically configured
MAC security addresses.
This command displays MAC address table information for the
specified bridge domain.
This command displays the number of addresses present for the
specified bridge domain.
This command displays the learning status for the specified bridge
domain.

Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)

Monitoring EVC
Pkts Out Bytes Out
0 0
47