Provisioning Service On The Ce-B - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring Ethernet Connectivity Fault Management in a Service Provider Network

Provisioning Service on the CE-B

SUMMARY STEPS
1. enable
2. configure terminal
3. ethernet cfm domain domain-name level level-id
4. service short-ma-name evc evc-name vlan vlanid direction down
5. continuity-check
6. continuity-check [interval cc-interval]
7. exit
8. mep archive-hold-time minutes
9. exit
10. ethernet cfm global
11. ethernet cfm traceroute cache
12. ethernet cfm traceroute cache size entries
13. ethernet cfm traceroute cache hold-time minutes
14. interface type number
15. service instance id ethernet [evc-name]
16. encapsulation encapsulation-type
17. bridge-domain bridge-id
18. cfm mep domain domain-name mpid id
19. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
ethernet cfm domain domain-name level level-id
Example:
Device(config)# ethernet cfm domain Customer
level 7
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Defines a CFM maintenance domain at a particular
maintenance level and enters Ethernet CFM configuration
mode.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
Configuring Ethernet CFM
177