Carrier Ethernet Configuration Guide (Cisco Asr 920 Series - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring Ethernet CFM
Command or Action
Example:
Device(config-ecfm-srv)# continuity-check interval
10s
Step 8 continuity-check [interval time | loss-threshold threshold
| static rmep]
Example:
Device(config-ecfm-srv)# continuity-check
loss-threshold 10
Step 9 exit
Example:
Device(config-ecfm-srv)# exit
Step 10
exit
Example:
Device(config-ecfm)# exit
Step 11 ethernet cfm global
Example:
Device(config)# ethernet cfm global
Step 12
ethernet cfm ieee
Example:
Device(config)# ethernet cfm ieee
Step 13 ethernet cfm traceroute cache
Example:
Device(config)# ethernet cfm traceroute cache
Step 14 ethernet cfm traceroute cache size entries
Example:
Device(config)# ethernet cfm traceroute cache
size 200

Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)

266
Purpose
Sets the number of CCMs that should be missed before
declaring that a remote MEP is down.
Returns the device to Ethernet CFM configuration mode.
Returns the device to global configuration mode.
Enables CFM processing globally on the device.
Enables the CFM IEEE version of CFM.
• This command is automatically issued when the
ethernet cfm global command is issued.
Enables caching of CFM data learned through traceroute
messages.
Sets the maximum size for the CFM traceroute cache
table.
Configuring Ethernet CFM