Clearing All Dynamically Learned Mac Addresses On A Bridge Domain - Cisco ASR 920 Series Configuration Manual Ethernet Router

Clearing All Dynamically Learned MAC Addresses on a Bridge Domain

Command or Action
Step 3
end
Example:
Device# end
Clearing All Dynamically Learned MAC Addresses on a Bridge Domain
Perform this task to clear all dynamically learned MAC addresses on a bridge domain.
SUMMARY STEPS
1. enable
2. clear bridge-domain bridge-id mac table
3. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
clear bridge-domain bridge-id mac table
Example:
Device# clear bridge-domain 100 mac table
Step 3 end
Example:
Device# end
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
114
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Returns to user EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Clears all dynamically learned MAC addresses on the
specified bridge domain.
Returns to user EXEC mode.
Purpose