Verifying Evc Local Connect Configuration; Verifying Traffic Statistics - Cisco ASR 920 Series Configuration Manual Ethernet Router

Verifying EVC Local Connect Configuration

member GigbitEthernet0/3/7 service-instance 1
interworking vlan
end
Verifying EVC Local Connect Configuration
Verifying EVC Local Connect Configuration
show l2vpn service xconnect name efp2
Legend: St=State
Interface
---------
--
VPWS name: efp2, State: UP
Gi0/1/6
Gi0/1/7
Verifying not Configured EVC Local Connect
show l2vpn service xconnect name efp2
Legend: St=State
Interface
---------
Xconnect entry does not exist
Verifying EVC Local Connect with Interworking VLAN
show l2vpn service name test1
Legend: St=State
Interface
---------
VPWS name: test1, State: UP
Gi0/1/6
Gi0/1/7

Verifying Traffic Statistics

show interface gig0/1/6 | in pack
30 second input rate 43604000 bits/sec, 43955 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
show interface gig0/1/7 | in pack
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 43131000 bits/sec, 43482 packets/sec
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
54
XC St=State in the L2VPN Service
UP=Up DN=Down
SB=Standby HS=Hot Standby
m=manually selected
Group
-----
-----
XC St=State in the L2VPN Service
UP=Up DN=Down
SB=Standby HS=Hot Standby
m=manually selected
Group
-----
XC St=State in the L2VPN Service
UP=Up DN=Down
SB=Standby HS=Hot Standby
m=manually selected
Group
-----
1521946 packets input, 188721304 bytes, 0 no buffer
0 packets output, 0 bytes, 0 underruns
AD=Admin Down
RV=Recovering
Encapsulation
----
Gi0/1/6:2(Eth VLAN)
Gi0/1/7:2(Eth VLAN)
AD=Admin Down
RV=Recovering
Encapsulation
-------------
AD=Admin Down
RV=Recovering
Encapsulation
-------------
Gi0/1/6:1(Ethernet)
Gi0/1/7:10(Eth VLAN)
EVC Local Connect
Prio=Priority
IA=Inactive
NH=No Hardware
Prio St XC St
0 UP UP
0 UP UP
Prio=Priority
IA=Inactive
NH=No Hardware
Prio St XC St
---- -- -----
Prio=Priority
IA=Inactive
NH=No Hardware
Prio St XC St
---- -- -----
0 UP UP
0 UP UP