Modular Quality Of Service Command-Line Interface Qos; Finding Feature Information - Cisco cBR 8 Configuration Manual

Modular Quality of Service Command-Line
Interface QoS
This module contains the concepts about applying QoS features using the Modular Quality of Service (QoS)
Command-Line Interface (CLI) (MQC) and the tasks for configuring the MQC. The MQC allows you to
define a traffic class, create a traffic policy (policy map), and attach the traffic policy to an interface. The
traffic policy contains the QoS feature that will be applied to the traffic class.
•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Finding Feature Information, page 9
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 10
Restrictions for Applying QoS Features Using the MQC, page 10
About, page 11
How to Apply QoS Features Using the MQC, page 17
Configuration Examples for Applying QoS Features Using the MQC, page 21
How to Configure Input MQC on the Port-Channel Interfaces, page 25
Example: Configuring Input MQC on the Port-Channel Interfaces, page 27
Additional References, page 28
Feature Information for Modular Quality of Service Command-Line Interface QoS, page 28
Bug Search Tool
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
C H A P T E R
and the release notes for your platform and software release. To
2
16.7.x
9