Showing The Mac Addresses Of A Specific Service Instance - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show ethernet service instance mac security address
Example:
Device# show ethernet service instance mac
security address
Step 3
end
Example:
Device# end

Showing the MAC Addresses of a Specific Service Instance

SUMMARY STEPS
1. enable
2. show ethernet service instance id id interface type number mac security address
3. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show ethernet service instance id id interface type
number mac security address
Example:
Device# show ethernet service instance id 200
interface GigabitEthernet 1/0 mac security address
Showing the MAC Addresses of a Specific Service Instance
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays the secured addresses on all the service
instances.
Returns to user EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays the addresses of a specific service
instance.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
109