Carrier Ethernet Configuration Guide (Cisco Asr 920 Series - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring IEEE 802.3ad Link Bundling
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
interface port-channel group-number
Example:
Device(config)# interface port-channel 10
Step 4 lacp min-bundle number
Example:
Device(config-if)# lacp min-bundle 2
Step 5 end
Example:
Device(config-if)# end
Step 6
show running-config interface port-channel group-number
Example:
Device# show running-config interface port-channel
1
Step 7 show interfaces port-channelgroup-number
Example:
Device(config)# show interfaces port-channel 1
Although the EtherChannel Min-Links feature works correctly when configured only on one end of an
Note
EtherChannel, for best results, configure the same number of minimum links on both ends of the
EtherChannel.
Configuring the EtherChannel Min-Links Feature
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Selects an LACP port channel interface.
Configures the minimum number of bundle ports in
the EtherChannel for the port channel interface to
transition to the link-up state. Default is one.
Exits configuration mode.
Displays the port channel configuration.

Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)

359