Carrier Ethernet Configuration Guide (Cisco Asr 920 Series - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring Ethernet Local Management Interface at a Provider Edge
SUMMARY STEPS
1. enable
2. show ethernet lmi {{evc [detail evc-id [interface type number] | map interface type number]} |
{parameters | statistics} interface type number | uni map [interface type number]}
3. show ethernet service evc [detail | id evc-id [detail] | interface type number [detail]]
4. show ethernet service instance [detail | id id | interface type number | policy-map | stats]
5. show ethernet service interface [type number] [detail]
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show ethernet lmi {{evc [detail evc-id [interface type number]
| map interface type number]} | {parameters | statistics}
interface type number | uni map [interface type number]}
Example:
Device# show ethernet lmi evc
Step 3 show ethernet service evc [detail | id evc-id [detail] | interface
type number [detail]]
Example:
Device# show ethernet service evc
Step 4 show ethernet service instance [detail | id id | interface type
number | policy-map | stats]
Example:
Device# show ethernet service instance detail
Step 5
show ethernet service interface [type number] [detail]
Example:
Device# show ethernet service interface ethernet 1/3
detail
Displaying Ethernet LMI and OAM Manager Information
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays information that was sent to the customer
edge (CE).
Displays information about all Ethernet virtual
circuits (EVCs) or about a specified EVC.
Displays information about customer service
instances.
Displays interface-only information about Ethernet
customer service instances for all interfaces or for a
specified interface.

Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)

295