Configuring And Enabling The Cross-Check Function (Ce-B) - Cisco ASR 920 Series Configuration Manual Ethernet Router

Configuring Ethernet CFM
Command or Action
Step 6
exit
Example:
Device(config-ecfm)# exit
Step 7 ethernet cfm mep crosscheck start-delay delay
Example:
Device(config)# ethernet cfm mep crosscheck
start-delay 60
Step 8
exit
Example:
Device(config)# exit
Step 9 ethernet cfm mep crosscheck {enable | disable} domain
domain-name {port | vlan {vlan-id | vlan-id - vlan-id | ,
vlan-id - vlan-id}}
Example:
Device# ethernet cfm mep crosscheck enable domain
cust4 vlan 100

Configuring and Enabling the Cross-Check Function (CE-B)

SUMMARY STEPS
1. enable
2. configure terminal
3. ethernet cfm domain domain-name level level-id
4. service short-ma-name evc evc-name vlan vlanid direction down
5. mep mpid mpid
6. exit
7. ethernet cfm mep crosscheck start-delay delay
8. exit
9. ethernet cfm mep crosscheck {enable | disable} domain domain-name {port | vlan {vlan-id | vlan-id
- vlan-id | , vlan-id - vlan-id}}
Purpose
Returns the device to global configuration mode.
Configures the maximum amount of time that the device
waits for remote MEPs to come up before the cross-check
operation is started.
Returns the device to privileged EXEC mode.
Enables cross-checking between the list of configured
remote MEPs of a domain and MEPs learned through
CCMs.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
Configuring Ethernet CFM
269