Parameter Group: Identification (Option); Parameter Group: System Parameters (Locked); Parameter Group: Miscellaneous - Emerson Bettis RTS CL Series User Instructions

Section 7: Parameter Menu
February 2019
7.17

Parameter Group: Identification (option)

This option allows entering further custom-identification parameters
Table 24.
P18.1
7.18

Parameter Group: System Parameters (locked)

Used for actuator configuration and not available for customers
7.19

Parameter Group: Miscellaneous

Table 25.
P20.1
P20.2
P20.3
59
Identification Parameter Group
Sub Menu
Menu Item
Item
Identification PPS number
Miscellaneous Parameter Group (1)
Sub Menu
Menu Item
Item
Miscellaneous Language
Miscellaneous Smartcode
Miscellaneous Restore para
Poss.
Notes / Comments
Setting
Used to enter a PPS number. This is displayed in the
15-digit
bottom line. CAUTION: point P20.5 must be set to 0.
Poss.
Notes / Comments
Setting
0: German
1: English
2: Russian
3: Czech
4: Spanish
5: French
6: Italian Defines the menu language
7: Danish
8: Hungarian
9: Turkish
10: Greek
11: Polish
12: Serbian
13: Croation
Enables additional features by entering a Smartc
0: no action
By saving this setting, all parameters except the end
1: Custpara -
positions are reset to the customer parameters
By saving this setting, all parameters are reset to the
2: Custpara +
customer parameters
3: By saving this setting, all parameters except the end
Backuppara - positions are reset to the factory settings
4: By saving this setting, all parameters are reset to the
Backuppara + factory settings
User Instructions
MAN-02-04-60-0350-EN Rev. 3
Parameter Menu