Network > Wlan Params - Printronix T8000 Administrator's Manual

You can enable/disable the BootP protocol using this option, but consult
your administrator for the appropriate setting.
Disable
Enable
Factory Default
IMPORTANT
Network > WLAN Params
A 1-32 character, case-sensitive string that identifies the Extended Service
Set Identification (ESS_ID) network the unit is parrt of (ESS_ID is also called
NET_ID). These characters can be alphanumeric, symbols, or spaces.
IMPORTANT
Allows you to reset the SSID name
IMPORTANT
Allows you to set the minimum speed at which the Wireless Option will
accept a connection (inmillions of bits per second). The options are
Auto-negotiate, 1Mb/sec, 2Mb/sec, 5.5Mb/sec, and 11Mb/sec.
Minimum
Maximum
Factory Default
IMPORTANT
190
Network > WLAN> BootP
BootP is disabled.
BootP is enabled.
Disable
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > SSID Name
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Reset SSID Name
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Min Xfer Rate
1Mb/sec
11Mb/sec
Auto Negotiate
If changed, the printer reboots when it is placed
ONLINE.