Operating Modes; Laserlight3 Options - Rice Lake LaserLight3 Series Technical Manual

Remote display

Hide thumbs Also See for LaserLight3 Series:

Table of Contents

1.4

Operating Modes

Modes available to the LaserLight3 remote display are detailed in

Mode

Remote Display Mode

Menu Mode

Setup Mode

1.5

Options for the LaserLight3 include:

• Flange Pole mount kit (see PN 75856)

• VESA Pole mount kits (see PN 212745)

• Sunshade Visor kit (see PN 214693)

• Wi-Fi (factory installed, PN 209118)

• ConnexLink (see PN 212753)

Remote Display mode is the primary mode of the device. The LaserLight3 displays data that is received

from an external source, such as an indicator

Menu mode is accessible by pressing

Accumulator, Tare, Time, Date, MAC ID, and Version menus is available when in Menu mode

Many of the procedures described in this manual, require the indicator to be in Setup mode.

See

Section 2.7.2 on page 22

for the procedure to enter Setup mode and the parameters available

Table 1-1. Operating Mode Descriptions

Table

1-1.

Description

on the front panel. Access to the Audit, Setpoint,

Introduction

Table of Contents