Initial Instrument Setup - GE MFE DMS 2 Operating Manual

3. Setting Up the DMS 2
FIGURE 3-1—Insert batteries as shown here.
Remaining battery life is visually displayed by the
The location of this icon is shown in Figure 2-8. When fresh
batteries are installed, the icon will appear as "full" (entirely
black). As the battery life is consumed, the icon will begin to
"empty."
NOTE: When the battery indicator is in the last quarter as
indicated by the symbol
as possible. The DMS 2 automatically shuts off when
Page 46
icon.
, replace the batteries as soon
batteries are too weak for reliable operation. Settings are
saved and restored when the DMS 2 is turned on again.
When testing in remote locations, always carry spare
batteries.
3.2

Initial Instrument Setup

In this part of Chapter 3, you'll learn how to configure the
DMS 2's display and operating features. Before you begin,
DMS 2 Operating Manual