Removing The Air Baffle - IBM x3550 M4 Type 7914 Installation And Service Manual

Figure 20. Cover removal
5. Lift the server cover off the server and set it aside.

Removing the air baffle

Use this information to remove the air baffle.
About this task
To remove the air baffle, complete the following steps:
Procedure
1. Read the safety information that begins on "Safety" on page vii and
2. Turn off the server and peripheral devices and disconnect the power cords and
3. Remove the cover (see "Removing the cover" on page 36).
4. Grasp the air baffle, disengage pins from pin holes; then, lift the air baffle up.
Attention: For proper cooling and airflow, replace the server cover before you
turn on the server.
"Installation guidelines" on page 33.
all external cables (see "Turning off the server" on page 24).
Chapter 2. Installing optional devices
37