IBM x3550 M4 Type 7914 Installation And Service Manual page 776

201-827-001 • 201-827-002
201-827-001 Standalone Memory Test Aborted
Explanation: BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
201-827-002 Standalone Memory Test Aborted
Explanation: BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related Links:
v IBM Support Website
Latest level of DSA
v
Latest level of BMC/IMM
v
758
IBM System x3550 M4 Type 7914: Installation and Service Guide