IBM x3550 M4 Type 7914 Installation And Service Manual page 423

80010b01-0c01ffff Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (Ambient Temp)
Explanation: This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b010c01ffff or 0x80010b010c01ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Check the server airflow. Make sure that nothing is blocking the air from coming into or preventing
the air from exiting the server.
80010b01-1001ffff Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (PCI Riser 1 Temp)
Explanation: This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b011001ffff or 0x80010b011001ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Check the server airflow. Make sure that nothing is blocking the air from coming into or preventing
the air from exiting the server.
80010b01-1002ffff Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (PCI Riser 2 Temp)
Explanation: This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b011002ffff or 0x80010b011002ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Check the server airflow. Make sure that nothing is blocking the air from coming into or preventing
the air from exiting the server.
80010b01-0c01ffff • 80010b01-1002ffff
Appendix A. Integrated management module II (IMM2) error messages
405