Power Cords - IBM x3550 M4 Type 7914 Installation And Service Manual

To order a structural part, complete the following steps:
1. Go to http://www.ibm.com.
2. From the Products menu, select Upgrades, accessories & parts.
3. Click Obtain maintenance parts; then, follow the instructions to order the part
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
If you need help with your order, call the toll-free number that is listed on the
retail parts page, or contact your local IBM representative for assistance.

Power cords

For your safety, a power cord with a grounded attachment plug is provided to use
with this product. To avoid electrical shock, always use the power cord and plug
with a properly grounded outlet.
IBM power cords used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,
a maximum of 15 feet in length and a parallel blade, grounding-type attachment
plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
Table 19. Structural parts, Type 7914 (continued)
Index Description
Slide rail kit, universal
Miscellaneous parts kit includes:
Cable clip (front, internal)
Cable retainer (rear, external)
DVD filler
DVD retention bracket
IBM logo (EIA bracket)
Fan filler
M2.5x3.5 screw
M3x0.5 screw
M3.5x5 screw
PCI riser 1 bracket
PCI riser 2 bracket
Power supply filler
Rubber stopper
from the retail store.
Chapter 5. Parts listing, IBM System x3550 M4 Type 7914
Part number
94Y6719
94Y7571
193