IBM x3550 M4 Type 7914 Installation And Service Manual page 444

806f0007-0302ffff • 806f0008-0a01ffff
806f0007-0302ffff [ProcessorElementName] has Failed with IERR. (CPU 2)
Explanation: This message is for the use case when an implementation has detected a Processor Failed - IERR
Condition.
May also be shown as 806f00070302ffff or 0x806f00070302ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0042
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1. Make sure that the latest level of firmware and device drivers are installed for all adapters and standard devices,
such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
2. Update the firmware (UEFI and IMM) to the latest level (Updating the firmware).
3. Run the DSA program.
4. Reseat the adapter.
5. Replace the adapter.
6. (Trained technician only) Replace microprocessor n.
(Trained technician only) Replace the system board. (n = microprocessor number)
7.
806f0008-0a01ffff [PowerSupplyElementName] has been added to container [PhysicalPackageElementName].
(Power Supply 1)
Explanation: This message is for the use case when an implementation has detected a Power Supply has been
added.
May also be shown as 806f00080a01ffff or 0x806f00080a01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0084
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
426
IBM System x3550 M4 Type 7914: Installation and Service Guide