Server Controls, Leds, And Power; Front View - IBM x3550 M4 Type 7914 Installation And Service Manual

The IBM Systems Director Web and command-line interfaces provide a consistent
interface that is focused on driving these common tasks and capabilities:
v Discovering, navigating, and visualizing systems on the network with the
v Notifying users of problems that occur on systems and the ability to isolate the
v Notifying users when systems need updates and distributing and installing
v Analyzing real-time data for systems and setting critical thresholds that notify
v Configuring settings of a single system and creating a configuration plan that
v Updating installed plug-ins to add new features and functions to the base
v Managing the life cycles of virtual resources
For more information about IBM Systems Director, see the documentation on the
IBM Systems Director DVD that comes with the server, the IBM Systems Director
Information Center at http://pic.dhe.ibm.com/infocenter/director/pubs/
index.jsp?topic=%2Fcom.ibm.director.main.helps.doc%2Ffqm0_main.html, and the
Systems Management website at http://www.ibm.com/systems/management/,
which presents an overview of IBM Systems Management and IBM Systems
Director.

Server controls, LEDs, and power

This section describes the controls and light-emitting diodes (LEDs) and how to
turn the server on and off.
For the locations of other LEDs on the system board, see "System-board LEDs" on
page 32.

Front view

The following illustrations show the controls, LEDs, and connectors on the front of
your server model.
2.5-inch hard disk drive server model.
Figure 5. Front view: 2.5-inch
3.5-inch hard disk drive server model.
16
IBM System x3550 M4 Type 7914: Installation and Service Guide
detailed inventory and relationships to the other network resources
sources of the problems
updates on a schedule
the administrator of emerging problems
can apply those settings to multiple systems
capabilities