IBM x3550 M4 Type 7914 Installation And Service Manual page 373

40000023-00000000 Flash of [arg1] from [arg2] succeeded for user [arg3] .
Explanation: This message is for the use case where a user has successfully flashed the firmware component (MC
Main Application, MC Boot ROM, BIOS, Diagnostics, System Power Backplane, Remote Expansion Enclosure Power
Backplane, Integrated System Management Processor, or Remote Expansion Enclosure Processor) from the interface
and IP address ( %d.
May also be shown as 4000002300000000 or 0x4000002300000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000024-00000000 Flash of [arg1] from [arg2] failed for user [arg3].
Explanation: This message is for the use case where a user has not flashed the firmware component from the
interface and IP address due to a failure.
May also be shown as 4000002400000000 or 0x4000002400000000
Severity: Info
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0036
SNMP Trap ID: 22
Automatically notify Support: No
User response: Information only; no action is required.
40000025-00000000 The [arg1] on system [arg2] is 75% full.
Explanation: This message is for the use case where a Management Controller Event Log on a system is 75% full.
May also be shown as 4000002500000000 or 0x4000002500000000
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0037
SNMP Trap ID: 35
Automatically notify Support: No
User response: Information only; no action is required.
40000023-00000000 • 40000025-00000000
Appendix A. Integrated management module II (IMM2) error messages
355