IBM x3550 M4 Type 7914 Installation And Service Manual page 372

40000020-00000000 • 40000022-00000000
40000020-00000000 Management Controller [arg1] Reset was caused by restoring default values.
Explanation: This message is for the use case where a Management Controller has been reset due to a user restoring
the configuration to default values.
May also be shown as 4000002000000000 or 0x4000002000000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0032
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000021-00000000 Management Controller [arg1] clock has been set from NTP server [arg2].
Explanation: This message is for the use case where a Management Controller clock has been set from the Network
Time Protocol server.
May also be shown as 4000002100000000 or 0x4000002100000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0033
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000022-00000000 SSL data in the Management Controller [arg1] configuruation data is invalid. Clearing
configuration data region and disabling SSL.
Explanation: This message is for the use case where a Management Controller has detected invalid SSL data in the
configuration data and is clearing the configuration data region and disabling the SSL.
May also be shown as 4000002200000000 or 0x4000002200000000
Severity: Error
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the certificate that you are importing is correct.
2. Try to import the certificate again.
354
IBM System x3550 M4 Type 7914: Installation and Service Guide