IBM x3550 M4 Type 7914 Installation And Service Manual page 85

Figure 49. RAID adapter battery or flash power module installation
Note: The positioning of the battery or flash power module depends on the
type of the battery or flash power module that you install.
c. Connect the other end of the cable to the battery or flash power module.
d. Lower and press down on the retention clip until it snaps in place to hold
the battery or flash power module firmly in place.
Results
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 96.
Chapter 2. Installing optional devices
67