Front Panel Description - Cisco BPX 8620 Installation And Configuration Manual

Chapter 3 BPX Switch Common Core Components
Figure 3-2
module 1

Front Panel Description

The BCC front panel has four Led, three card status LEDs, and a LAN LED (see Figure 3-3 and
Table 3-1).
Table 3-1
Number Indicator
1
2
3
4
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
BCC-4V Block Diagram
I/O I/O
module 2
DRSIU DRSIU
BCC Front Panel Indicators
Function
LAN Indicates there is data activity over the Ethernet LAN port.
card - act Card active LED indicates this BCC is online and actively controlling
the node.
card - stby Card standby LED indicates this BCC is offline but is ready to take over
control of the node at a moments notice.
card - fail Card fail LED indicates this BCC has failed the internal self-test routine
and needs to be reset or replaced.
TX data-2A
S
RX data-2A
TX data-12A
RX data-12A
s6392
Cisco BPX 8600 Series Installation and Configuration
Broadband Controller Card
I/O
module 12
TX data-1A
RX data-1A
DRSIU
Polling bus-A
Polling bus-B
TX data-1B
RX data-1B
TX data-2B
RX data-2B
TX data-12B
RX data-12B
BCC-A
BCC-A
3-5