Technical Specifications; Physical Layer - Cisco BPX 8620 Installation And Configuration Manual

Technical Specifications

Table 5-11 Channel Statistics per Level (continued)
Level 0
Technical Specifications
This section describes the technical specifications for the BXM card sets.

Physical Layer

•
•
•
•
•
•
Cisco BPX 8600 Series Installation and Configuration
5-32
Level 1
Rx CLP1 noncmplt
Ingress VC Q depth
Tx cells from NW
TX CLP1 to port
Tx cells to port
RX CLP0 Cng Dscd
Rx CLP1 Cng Dscd
RX CLP0 from port
TX CLP0 cells to port
TX CLP0 from NW
TX CLP1 from NW
Ingress VS/VD ACR
Egress VS/VD ACR
Egress VC Q depth
Tx CLP 0 Dscd
Tx CLP 1 Dscd
Tx CLP 0+1 Dscd
Rx CLP 0+1 from port
Trunk or port mode.
Compliant to SONET standards.
– *Bellcore GR-253-CORE, TR-TSY-000020
*ANSI T1.105, T1E1.2/93-020RA
–
Compliant to SDH standards.
*ITU-T G.707, G.708 and G.709
–
*ITU-T G.957, G.958
–
1:1 BXM redundancy supported using 'Y' redundancy.
APS 1:1 and 1+1
Fiber optic interface characteristics are listed in Table 5-12 and Table 5-13.
Chapter 5 BXM Card Sets: T3/E3, 155, and 622
Level 2
RX EFCI 1 to NW
RX EOF Cng Dscd RM from NW
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Level 3
RM cells from port
OAM from NW
RM cells from port
RX EFCI 0 Cng Dscd
RX EFCI 1 Cng Dscd
Rx OAM Cng Dscd
Rx RM Cng Dscd
Rx FRM to NW
Rx BRM/Fst to NW
Tx EFCI 0 Cng Dscd
Tx EFCI 1 Cng Dscd
Tx RM Cng Dscd
Tx OAM Cng Dscd