Front Panel Description - Cisco 2431 - IAD Router Hardware Installation Manual

Front Panel Description

•
•
Front Panel Description
The Cisco ME switch front panel descriptions include these sections:
•
•
•
•
•
•
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
1-2
100BASE-LX
–
1000BASE-BX
–
1000BASE-LX/LH
–
1000BASE-SX
–
1000BASE-T
–
– 1000BASE-ZX
– Coarse wavelength-division multiplexing (CWDM)
When installed in Cisco ME switches, 1000BASE-T SFP modules can operate at 10, 100, or
Note
1000 Mbps in full-duplex mode or at 10 or 100 Mbps in half-duplex mode.
By default, the SFP module ports on the Cisco ME switch are configured as network node
Note
interfaces (NNIs). A port can be reconfigured from user network interface (UNI) to NNI and
the reverse, but only four ports on the switch can be NNIs at the same time. For more
information on configuring interfaces, see the software configuration guide.
These switches support the SFP module patch cable. (Order the SFP module patch cable separately,
part number CAB-SFP-50CM=.)
Configuration
– For 10/100 ports, the speed and duplex settings are autonegotiated.
For 1000BASE-T SFP module ports, the speed and duplex settings are autonegotiated.
–
Front Panel Descriptions, page 1-3
10/100 Ports, page 1-3
SFP Module Slots, page 1-4
LEDs, page 1-5
Power Connectors, page 1-7
Console Port, page 1-7
Chapter 1 Product Overview
OL-7678-01