Mechanical Installation
Figure 7-3
BPX Shelf
front flanges
(not used)
Attach with
self-tapping screws
(P/N 48-0616-01)
A. T-Rack or equivalent provided by customer, with setback of 5 inches.
BPX Shelf
front flanges
(not used)
Attach with
self-tapping screws
(P/N 48-0616-01)
A. T-Rack or equivalent provided by customer, with setback of 10 inches.
Vertical Positioning
For recommended typical equipment configurations in a Cisco cabinet, see Chapter 2, "BPX Switch
Physical Overview."
Installing a BPX Switch Shelf, Preliminary Steps
The BPX switch shelf is designed for mounting in a standard 19-inch (48.25 cm) equipment rack such
as the standard Cisco cabinet. A minimum width between rails of 17.750 inches (44.45 cm) is required
(see Figure 7-4 and Figure 7-5).
Cisco BPX 8600 Series Installation and Configuration
7-8
BPX Shelf and T-Rail (Open Rack) or Equivalent Mounting Options
5"
Support bracket
P/N 700-214509-00
10"
Support bracket
P/N 700-214509-00
BPX Shelf
Customer vertical rail
(T-Rail) or equivalent
BPX Shelf
Customer vertical rail
(T-Rail) or equivalent
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 7
Preliminary Steps Before Installing
Note:
Rear support
mounting
recommended