Virtual Trunk Commands Common To Bxm And Uxm; Table 24-5 Virtual Trunk Commands Common To Bxm And Uxm (Igx) - Cisco BPX 8620 Installation And Configuration Manual

Command Overview

Virtual Trunk Commands Common to BXM and UXM

The entries in Table 24-5 that are marked with a [*} are configured on a logical trunk basis, but
automatically affect all trunks on the port when a physical option is changed. For example, if the line
framing is changed on a virtual trunk, all virtual trunks on the port are automatically updated to have the
modified framing.
The virtual trunk commands are available on both the IGX and the BPX and have the same results
(see Table 24-5). For more information on the IGX and UXM, refer to the IGX documentation.

Table 24-5 Virtual Trunk Commands Common to BXM and UXM (IGX)

Command
addtrk
ckrtrkerrs
clrtrkstats
clrphyslnerrs
cnflnalm
cnftrk
cnftrkparm
cnftrkstats
cnfphyslnstats
deltrk
dntrk
dspcntrstats
dsplogtrk
dspphyslnstatcnf
dspphyslnstathist
dsptrkcnf
dsptrkcons
dsptrkerrs
dsptrks
dsptrkstatcnf
dsptrkstathist
dsptrkstats
dsptrkutl
prtphyslnerrs
prttrkerrs
prttrks
uptrk
Cisco BPX 8600 Series Installation and Configuration
24-18
Description
Adds a trunk to the network.
Clears the trunk errors for a logical trunk.
Clears the summary trunk statistics for a logical trunk.
Clears trunk errors for a physical line.
Configures the statistical alarm thresholds for trunks and ports. For
example, all trunks on a node are affected.
Configures a logical trunk [*].
Configures the trunk parameters of a logical trunk [*].
Configures the interval statistics collection for a logical trunk.
Configures the interval statistics for a physical line.
Deletes a trunk from the network.
Downs a trunk.
Views, in real-time, all counter statistics of a specified entity.
Displays the logical trunk information.
Displays the statistics configuration for a physical line.
Displays the statistics collection result for a physical line.
Displays the trunk configuration.
Displays the number of connections routed over a trunk.
Displays the trunk errors for a logical trunk.
Displays the upped or added trunks.
Displays the configured statistics collection for a trunk.
Displays the statistics collection results for a trunk.
Displays the summary trunk statistics for a trunk.
Displays the utilization or traffic for a logical trunk.
Prints the trunk errors for a physical line.
Prints the trunk errors for a logical trunk.
Prints the active logical trunks.
Ups a trunk.
Chapter 24 Configuring BXM Virtual Trunks
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005