Figure 11-5 Securing An Ac Power Supply Tray, 19.86 Inch Rear Rail Setback - Cisco BPX 8620 Installation And Configuration Manual

Installing an AC Power Supply Tray

Figure 11-5 Securing an AC Power Supply Tray, 19.86 inch Rear Rail Setback

Connect and secure a power supply interconnect cable (see Cable A in Figure 11-6) between the primary
Step 9
AC Power Supply and the BPX switch backplane power connector.
Connect and secure a second power supply interconnect cable (see Cable B in Figure 11-6) between the
Step 10
redundant AC Power Supply and the BPX switch backplane power connector.
Remove the temporary support bracket and spacer bracket from the front of the cabinet.
Step 11
Cisco BPX 8600 Series Installation and Configuration
11-6
Chapter 11
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Installing the AC Shelf