Y-Cabling Of Bni Back Card, Smf-2-Bc; Figure 4-8 Y-Cable (Model Smfy), Lc-Oc-3-Smf (Model Smf-2-Bc) - Cisco BPX 8620 Installation And Configuration Manual

Chapter 4 BNI (Trunk) Cards

Y-Cabling of BNI Back Card, SMF-2-BC

Y-Cabling of BNI Back Card, SMF-2-BC
The LM-OC-3-SMF (Model SMF-2-BC) back cards may be Y-cabled for redundancy by using the
Y-Cable splitter shown in Figure 4-8. You must configure the cards for Y-Cable redundancy by using the
addyred command.
Figure 4-8 Y-Cable (Model SMFY), LC-OC-3-SMF (Model SMF-2-BC)
Cisco BPX 8600 Series Installation and Configuration
4-14
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005