Atm Command List; Table 21-16 Atm Connection Commands - Cisco BPX 8620 Installation And Configuration Manual

ATM Command List

ATM Command List
The commands used for ATM connection are listed in Table 21-16. For more information, refer to the
Cisco WAN Switching Command Reference, Release 9.3.30.

Table 21-16 ATM Connection Commands

Name
addcon
clrchstats
cnfabrparm
cnfatmcls
cnfcdparm
cnfcls
cnfcon
cnfport
cnfportq
delcon
dnport
dspatmcls
dspchstats
dspcls
dspcon
dspconcnf
dspcons
dsplmistats
dspport
dspportq
dspportstats
tstconseg
tstdelay
upport
Cisco BPX 8600 Series Installation and Configuration
21-54
Description
Adds a connection.
Clears the channel statistics.
Configures ABR parameters (applies to BXM).
Configures the ATM class.
Configures the channel statistic level on UXM/BXM cards.
Configures the class.
Configures the connection.
Configures the port.
Configures the port queue.
Deletes the connection.
Downs a port.
Displays the ATM class.
Displays the channel statistics.
Displays the class.
Displays the connection.
Displays the connection configuration.
Displays the connections.
Displays the LMI statistics.
Displays the port.
Displays the port queue.
Displays the port statistics.
Tests the connection externally with OAM segment loopback cells.
Tests the traffic continuity and connection roundtrip delay.
Ups the port.
Chapter 21 Configuring ATM Connections
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005