Figure 22-1 Frame Relay To Atm Network Interworking; Figure 22-2 Frame Relay To Atm Service Interworking - Cisco BPX 8620 Installation And Configuration Manual

Hide thumbs Also See for BPX 8620:

Table of Contents

Figure 22-1 Frame Relay to ATM Network Interworking

Network interworking connection from CPE Frame Relay port

to CPE Frame Relay port across an ATM Network with the

interworking function performed by both ends of the network.

Network interworking connection from CPE Frame Relay port

to CPE ATM port across an ATM network, where the network

performs an interworking function only at the Frame Relay end

of the network. The CPE receiving and transmitting ATM cells at

its ATM port is responsible for exercising the applicable service

specific convergence sublayer, in this case, (FR-SSCS).

Cisco BPX 8600 Series Installation and Configuration

interworking

Configuring Frame Relay to ATM Network and Service Interworking

standard, non-

service specific

Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005

Bpx 8650 Bpx 8680 Bpx 8680-ip