Installing Tray; Figure 12-1 Installation Of Cable Management Tray Brackets - Cisco BPX 8620 Installation And Configuration Manual

Installation of Cable Management Tray

Figure 12-1 Installation of Cable Management Tray Brackets

Installing Tray

To install a tray, use the following procedure:
Using two hands to hold the cable management tray, slide it over the brackets (see Figure 12-2).
Step 1
Lower the tray into the lower rest position (see Figure 12-3).
Step 2
Cisco BPX 8600 Series Installation and Configuration
12-2
BPX switch shelf
Bracket (1 of 2)
Chapter 12 Installing the T3/E3 Cable Management Tray
Threaded
stud
Nut
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005