Chapter 24
Configuring BXM Virtual Trunks
Virtual Trunk UXM Commands
The commands listed in Table 24-6 are IGX (UXM) specific, or behave differently than their BPX
counterparts. For further information about UXM virtual trunk commands, refer to the IGX 8400 Series
documentation.
Table 24-6 Virtual Trunk UXM Commands
Command
clrtrkalm
clrphyslnalm
dspphysln
clrtrkstats
Virtual Trunk BXM/BNI Commands
The BPX-specific commands are listed in Table 24-7.
Table 24-7 Virtual Trunk Commands BXM/BNI
Command
clrtrkalm
cnfrsrc
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Description
Clears the statistical alarms for a logical trunk. For example, logical trunk alarms
are affected.
Clears statistical alarms for a physical trunk (IGX only).
Displays physical line status (IGX only).
Clears the trunk statistics (IGX only).
Description
Clears the statistical alarms for a logical trunk [*]. (clears logical and physical
trunk alarms).
Configures the cell rate and number of connections (BXM only).
Cisco BPX 8600 Series Installation and Configuration
Command Overview
24-19