AT3-6ME (T3 to T2) Interface Adapter
This chapter describes the AT3-6ME Interface Adapter, sometimes referred to as the T3-T2 Interface
Adapter. It is used with the BPX switch to provide a 6 Mbps ATM network interface to T2 transmission
facilities.
Contents of this chapter include:
•
•
•
•
•
•
Application
The AT3-6ME Interface Adapter is used with the BPX Broadband ATM Switch in applications where it
is required to interface a 6 Mbps T2 digital network facility to the 45 Mbps T3 ATM port on the BPX or
IGX node.
Applications include networks where T2 transmission facilities are available. Users with ATM networks
who require somewhat more bandwidth than is provided by the T1 or E1 ATM network connections but
do not need the full T3 bandwidth provided by the BPX ATM network ports can also benefit from using
the AT3-6ME Interface Adapter. For a typical application, see Figure 32-1.
Figure 32-1 Network Application
BPX/IGX
ATM interface
UNI or NNI
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Application
General Description
Equipment Description
Installation
Operation
Specifications
T2 network trunk
AT3-6M
adapter
T3 ATM interface
ATM UNI standard
T2 network trunk
Network
T2 interface
Cisco BPX 8600 Series Installation and Configuration
32
C H A P T E R
BPX/IGX
AT3-6M
ATM interface
adapter
UNI or NNI
32-1