Figure 7-2 Cabinet Mounting Options For The Bpx Shelf - Cisco BPX 8620 Installation And Configuration Manual

Chapter 7 Preliminary Steps Before Installing
Figure 7-2
BPX shelf
front flanges
Front rail
A. Cisco Cabinet mounting with rear rail at 19.86 inches setback.
BPX shelf
front flanges
Front rail
B. Customer furnished cabinet mounting with rear rail set at approximately 30 inches.
BPX switch shelves can also be mid-mounted to an open T-Rail type rack (see Figure 7-3) with
unrestricted front to rear air flow. To facilitate this type of installation, brackets may be fastened to the
BPX switch shelf at a 5 or 10 inch setback for supporting the front of the BPX switch shelf. Additional
rear mounting support is also recommended. Contact Cisco Customer Service for further information.
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Cabinet Mounting Options for the BPX Shelf
19.86"
BPX Shelf
Rear rail
30.00"
Adjustable plate
P/N 700-212938-00
(Dotted line indicates lowered
adjustable plate and support bracket
for securing AC power supply.)
Support
bracket
P/N 215960-00B
Support
bracket
P/N 215960-01B
Dotted line indicates
second support bracket
for securing AC
power supply.
BPX Shelf
Support
bracket
P/N 700-212939-00
Rear rail
Cisco BPX 8600 Series Installation and Configuration
Mechanical Installation
7-7