Parameter Settings - Mitsubishi Electric QJ71E71-100 User Manual

14.7.3

Parameter settings

This section describes the parameter settings for using the E71 in a redundant system. The following settings are
required:
• Basic setting
• Ethernet operation setting
• Open setting (if necessary) (
• Redundant settings
(1) Basic setting
Only the settings for a redundant system that differ from those for a single CPU system are listed.
Item
Network Type
Station No.
Mode
(2) Ethernet operation setting
The IP address configured in the Ethernet operation setting becomes the IP address of the E71 in the system A.
Set the IP address of the E71 in the system B in the redundant settings.
220
Chapter for each function)
Description
Select "Ethernet (Main Base)".
Set the station number of the E71 in the system A. Set the
station number of the E71 in the system B in the
Redundant Setting.
Select the operation mode of the E71 in the system A. Set
the operation mode of the E71 in the system B in the
Redundant Setting.
Setting range
-
1 to 64
• Online
• Offline
• Self-Loopback Test
• H/W Test