Data Communication Procedure - Mitsubishi Electric QJ71E71-100 User Manual

11.1

Data Communication Procedure

By using the predefined protocol support function, data can be communicated with the connected device in the
following procedure.
If "User Protocol Library" is selected in the "Add Protocol" window, protocols saved by user can be read.
For details on the User Protocol Library, refer to the following.
GX Works2 Version 1 Operating Manual (Intelligent Function Module)
CHAPTER 11 DATA COMMUNICATIONS USING THE PREDEFINED PROTOCOL
1.
Display the "Predefined Protocol Support Function"
window.
[Tool]
[Ethernet Module...]
2.
Create a new file.
[File]
3.
Select "Predefined Protocol Library" or "Add New"
in the "Add Protocol" window.
When "Predefined Protocol Library" is selected,
select the protocol from Predefined Protocol Library
registered in GX Works2.
[Predefined Protocol Support Function]
[New...] "Add"
11
113