Chapter 2 Part Names - Mitsubishi Electric QJ71E71-100 User Manual

CHAPTER 2
This chapter describes the E71 parts.
1)
2)
6)
No. Name
1) LED indicator
10BASE-T/100BASE-TX connector
2)
*1
(RJ45)
3) 10BASE5 connector
4) 10BASE2 connector
5) External power supply terminal
6) Serial number display
*1 The LED on the connector does not turn on. Depending on the serial number, the connector orientation is left-right
reversal.
PART NAMES
1)
3)
5)
6)
Refer to (1) in this chapter.
A connector to connect the E71 to the 10BASE-T or 100BASE-TX network (The E71
determines whether to use 10BASE-T or 100BASE-TX according to the hub.)
A connector to connect the E71 to the 10BASE5 network (for connecting a 10BASE5 AUI
cable (transceiver cable))
A connector to connect the E71 to the 10BASE2 network (for connecting a 10BASE2
coaxial cable)
A power supply terminal for supplying power to a transceiver in the 10BASE5 network
(13.28VDC to 15.75VDC)
A display indicating the serial number printed on the rating plate

CHAPTER 2 PART NAMES

1)
4)
6)
Application
2
25