(c) Redundant setting
(4) Sample program on the connected device
The program example of the connected device accessing the Q25PRHCPU in the E71-mounted station is
described. When this program is executed, the contents of the following communication messages are displayed
in order:
• Version of used Winsock
• Test starting message
• Batch write command message in word units
• Batch read response message in word units
• Test end message
Remark
The following is an outline of how to compile a program created using Microsoft
• Start Visual C++
• Create a project. From [File][New][Project], select ".NET" in "Project Types" and "Empty Project" in
"Templates", and set the project name (e.g. QJSAMP) and location.
• Create a source file. Open Solution Explorer. Then right-click Source Files and select [Add][Add New Item]. Set
the file name (e.g. QJSAMP.cpp) and location, and create a program according to the program example.
• From the project setting window, get WSOCK32.LIB linked. Open Solution Explorer. Then right-click the project
name (QJSAMP) and select [Properties][Configuration Properties][Linker][Command Line]. Type
WSOCK32.LIB in Additional Options and press the OK button.
• On the Build menu, click Build Solution to create an execution file (QJSAMP.EXE).
• Exit Visual C++
• Execute QJSAMP.EXE.
®
.NET.
®
.NET.
APPENDICES
®
®
Corporation Visual C++
.NET.
A
409