Appendix 5 Line Status Check; Appendix 5.1 Ping Test; Appendix 5 - Mitsubishi Electric QJ71E71-100 User Manual

Appendix 5

The E71 line status, parameter settings, and progress of the initial process can be checked. The following two
methods can be used to check the line status.
• PING test
• Loopback test
Appendix 5.1
This section describes the PING test.
(1) Method using direct connection to the E71
This test is to check the existence of an E71
network using the programming tool or to check the existence of a connected device, such as a personal
computer, having a specified IP address.
*1 This also applies to QnA/A series modules. However, for an AJ71E71, AJ71E71-B2, and AJ71E71-B5, software
versions S and later are required.
(a) Applications
The line status between the programming tool (personal computer) and the E71 can be checked.
Line Status Check
PING test
*1
that has completed the initial process on the same Ethernet
Programming tool
Executing the PING test
Specifying the IP address
Ethernet
E71
APPENDICES
A
363